Evaluation

To start off I am very happy with my final trailer. I felt that I used several key techniques such as KeyFraming, AutoFraming, Morphing, Reactor animating and biped and footstep tools. I have show that i can use multiple techniques to animate and I hope it has come across like this in the trailer. The funnest part of the this course for me has been animating, as I do not see myself as a very good artist and preffer to animate and put what knolage of editing to good use.

I found that the hardest part of the course was the model making as I have never been very artistic and this really let me down. It also made animating more difficult in certain ways, for example my james bond character model was twice as hard to animate as it should have been because I modeled him with his arms and legs to close to his body.

I feel that with more time I could have made a better trailer all round, especially with model design. I could have also made more unique bones for my james bond model rather then using 3D Studio Max's biped tool, as this made it more difficult to fit the model to the rig.

My favourite part of the trailer is the scene at the end of the james bond model fireing a gun. This is mostly due to how happy I was using the morpher and reactor to make the animation look realistic. The only part i didnt like with this was the james bond model's fingers and arm joint, as these looked flat and in-human because of the problems rigging the model.

In conclusion i am quick happy with the project as a whiole. I feel I learnt lots of new techniques and used them in the best way to create my trailer. I would like to be able to create better looking models, but until my artistic skills advance this is an impossibility. The course had deffenatly made me think more about how much work animators put into there work and how much quality is lost on the final product.

Final Animation

The final animation was finished after the last scene was completed. I used Adobe Premiere Pro CS5 to edit each clip and place them in order. After this I added transitions to avoid my animation looking to chopped up and then picked the best part from the music track to place on the animation. The sound effects where put in last as if anything was to be moved while editing the sound effects would be disorganised.

Editing in CS5.

Final Animation.

A note to add with the trailer is that I am aware that there are a lot of fade to blacks, and a blank delay at the end. These were most intentional and not for the sake of making a longer trailer. The animations themselves make up roughly 30 seconds give or take a second. The trailer is slightly longer because I wanted to to look good with different transitions, as well as alowing the music to finish at a good point, rather then just cutting it off. 

I want to make it clear that the blacks are edited in with the trailer to make it look more complete, and not to fill time as my animations all together came to 30 seconds.

Reference:
"Another Way To Die"  Jack White and Alicia Keys 2008
Digital Track
[14/4/2011]

All other sounds used in the trailer where either created by myself or downloaded from the royalty free sound effects website, www.findsounds.com

I would also at this time like to reference the head of my James Bond model. All credit for the original head goes to Richard Barns. I originally planed to have the trailer without a head and just use low angle shots but then found it difficult to follow.  I would have liked to have used my own model head but due to time and more honestly, lack of personal skill I was unable to do so.

Updated Scene Numbering

Since the storyboard has changed, and it is proving difficult to get them scanned and uploaded, I have written out a new list detailing scenes and where they will appear in the trailer. The storyboard will be included with the handed in version of this blog.

Scene 1 - Starts with the 2 sky scenes, where james bond walks over a hill into the camera shot.

Scene 2 - Multiple shots of the car chase scene which was filmed in 6 different camera angles. These have been filmed in order and will be placed on the animation 1 - 6.

Scene 3 - This will be the 007 logo that displays towards the end of the animation.

Scene 4 - The final scene will be of james bond fireing his gun towards the camera.

The music to accompany this will be the theme written for quantom of solace, "Another Way To Die" by A=Jack White and Alicia Keys. This will be played over the top of most of the animation, and only include the instrument part of the song at the begining. Several sound effects like car engines and gun shots will also be added and to the final animation.

Scene 3

My final scene is complete and I am now working on putting the animation together. The last scene to complete was added in after deciding I wanted more in the trailer. The clip is around 5 seconds and will be used in two parts during the animation. The scene contains my 007 model walking over a hilly foreground, with a skyline behind him. This was originally going to use the daylight feature for lighting but after many problems with shadows and effecting material colour, even when opacity was set to 100, I decided to opt for a clip without lighting.

The scene has 007 walk towards the camera with a weapon in his hand, being my G36 model. The movement was at first done by keyFraming but after discovering the bipeds "footstep" tool I decided to opt for the technique on the basis that it looked more human and realistic then the motion I had created with keyFrameing.

The bipeds "footstep" tool.

This is done by hylighting the bipeds main point and then moving through to the footsteps icon in the modify list. This then allows you to pick the number of steps, length, distance, time and many other features to help make each animation unique. 

The first part of Scene 3.

The second part of the scene is just a 2 second render of a still image. The reason I did this was purely because at the time my train of thought was, "if it's to long, I can cut it. If it's to short, I have to re-render" and the first choice seemed smarted to me.

The second part of Scene 3.

Morphing in my Animation

In my second scene I used both the morpher and reactor tools inside of 3D Studio Max. The scene included a shot of 007 kneeling on the ground infront of his DB9, fireing the G36. The shot was created using all 3 of my models (007, Aston Martin and G36 with bullet.)

I started by inserting the biped tool inside of my 007 model and attaching it in the same way I would if I had created my own bones. Looking back my own bones would have been easier to control the model as the biped proved difficult at times. The model then had any outstanding polygons added to there corisponding bones and began to move the model into shape. The first thing i noticed about this was that my model was built in a difficult position and made adding bones difficult. This then led to having bad shapes and a poor looking model to animate with, and given the time I would return to it and start over. The one addition I did make to the model was his hair, made by simply changing polygones ID and colouring them in a different colour.  Also later on in the animation I noticed that his face had no expression and so used the morph tool to make his facial expression change towards the end of the scene.

Using the morpher tool to add facial features.

The next thing I did was bring the gun into the scene and begin to morph it so that the release chamber opened on the side of the gun. This is not completely accurate to the gun but for the purposes of shoping different techniques I thought this was a good idea and infact came out quiet nicely. The morph was made by creating a copy of the same object, changing the copy to how I would like it to look, and then adding the morph tool to the origonal. This then allowed me to change the look of the gun easily and quickly.

The chamber that comes from the side of the gun was then animated using the reactor tool. I did this by adding the chamber and its container to the reactor and setting the chamber to have a mass of around 3 or 4. I then keyFramed a small side movement for the chamber to move sideways, and then the reactor did the rest by adding a gravitational pull towards the floor. This gave a very satisfiying look which I was very pleased with.

G36 with moropher set to 0.

G36 with morpher set to 100.

The end of the bullet then had to be added which in comparison took little time. i simply moved to the frame where the chamber was removed from the gun and had the bullet come out around the same time. To repeate this I made several copies of both bullet and chamber, and then moved there animations along the timeline.

After this was complete I added the Aston Martin and the background along with the the camera. The camera was made to pan and zoom by using the truck, orbit and dolly camera tools. I felt that this was a good camera shot as the shot was suppose to be a slowed down shot of 007 shooting.

Wireframe of models and Biped.

Models with textures.

Overall i am very happy with this scene. I used a variaty of tools and made a clean animation. If i could change it however I would deffinatly go back and re-design the 007 model, as well as look into lighting more. I was able to use lighting in my first scene via the daylight system however I found that when adding a muzzel flash into the animation it had problems working with the daylight system again.

 

Test render to cheak Reactor appearence.

Scene 2 has now been rendered and added to the trailer clip.

Finished render of scene 4.

Scene 1 Of 2

The first of my 2 main scenes has now been rendered. The scene I rendered first was the car chase where an Aston martin is chased by 2 Mitsubishi Evolutions. This scene was filmed using a mountain road set, which is featured at the begining of the film. The scene was shot using 6 different cameras using both KeyFrames and AutoFrames to move the objects. The shot of the car driving off the edge of the cliff was ment to be done using the reactor tool, however problems with this arrose and it is being used in the second scene.

The scene itself fills around a 20 second gap, however once edited together and cut into the correct places, the scene should last no linger then 10 seconds. Having multiple shots and angles is always good in film making as most shots used in films should be no longer then around 3 - 5 seconds.

The following videos shot the 6 seperate camera angles, before being added into the final project. The animations where all rendered using the mental ray renderer, and shot at a size of 1280 x 720.

 

Camera 1 of Scene 1

Camera 2 of Scene 1

 

Camera 3 of Scene 1

 

Camera 4 of Scene 1

Camera 5 of Scene 1

Camera 6 of Scene 1

SWOT Analysis

My SWOT for using 3D Studio Max

Strengths

•  Being able to use HotKeys effectivly helped a lot when trying to use the program. A lot of people use programs without being able to, or known most of the shortcutKeys which makes working on Studio Max a lot more effective and therefore quicker.

• My ability to learn has helped me a lot as well as being a new topic and program people can sometimes find it overwelming and difficult to remember. I find however that I learn helpful tips easily, which helps my overall performance later on.

Weaknesses

• My first weakness is my lack of skill and artistic talent. I can openly admit to being able to draw and design only the very basic images and models, and this makes it difficult when the program and subject rely heavily on these factors.

• Understanding of the program. I know, as stated above, meny of the shortcutKeys and tools inside of the program, however i do not know how the program works in respect to things like the reactor, renderer and texture devices. I have had several occasions where the program has seemed to fault, bring up errors and even delete work and crash, and I believe if I new more about the program I could do more to prevent these things from happening.

Opportunities

• To create my own models is a big opportunity for me. I have always wanted to be able to 'mod' or 'modifiy' games and is partly the reason i began this course. After learning skills and how to use this program I can now work toward creating my own, highly detailed models for such modifications, as well as any animations I may want to create.

Threats

• Render Time is a big threat for 3D Studio Max. Rendering a simple scene of a few seconds can take well into several hours of time if there are a lot of effects and images. The more detailed the models and animations are, including special effects such as explosions and lighting effects the longer the render time will be.